Massachusetts Top Electrical Contractors

From residential to commercial electrical jobs, big problems to small – you can count on Crown Electric to provide friendly, professional service for all of your electrical needs. Our customers depend on our experienced Massachusetts electricians for reliability. They know we are the electrical contractors who can fix the problem right the first time!

wiring electrical outlet

Checklist for choosing an electrician in Massachusetts

      • Check licenses and insurances.
      • Is their quote fair and competitive?
      • If your job is specialized, do they have experience in that field?
      • Has somebody recommended them or can they show you references?
      • Do they have a professional attitude and appearance?

Keeping these points in mind will help when trying to choose the right electrician for you.

electrical outlet repair

5 Ways to Prevent shocks and other electrical injuries

According to a study done by the Department of Labor's Bureau of Labor Statistics, 2,287 U.S. workers died and 32,807 sustained lost-time injuries from electrical shock or burn injuries between 1992 and 1999. Of these 32,807 non-fatal injuries involving lost time, 38 percent were classified as electrical burns. Each injury caused an average of 13 days away from work, and nearly one fatality occurred every day of the year. While this study is several years old, it's still relevant today because we continue to face the same issues with electrical shock and burn injuries. Here are two regulatory updates issued in response to this problem, with guidance on providing a safe workplace: OSHA Electrical Standard Update, Subpart S of 29 CFR Part 1910 OSHA, in the proposed rule, explains the reason for the update. OSHA undertook the project to revise 29 CFR Part 1910, Subpart S, for two major reasons. First, OSHA wanted the standard to reflect the most current practice and technology in the industry. Second, in implementing the rule, OSHA responded to requests from stakeholders to revise Subpart S so it reflects more recent editions of NFPA 70, the National Electrical Code, and NFPA 70E, Standard for Electrical Safety in the Workplace. According to OSHA's press release of Feb 13, 2007, "The changes to OSHA's general-industry electrical-installation standard focus on safety in designing and installing electrical equipment in the workplace. Included in the new standard are a new alternative method for classifying and installing equipment in Class I hazardous locations and new requirements for ground-fault circuit interrupters (GFCIs). The 2000 edition of the NFPA 70E was used as a foundation for the revised standard. The final rule also replaces the reference to the 1971 National Electrical Code in the mandatory appendix to the powered-platform standard with a reference to OSHA's new electrical-installation standard." The final rule becomes effective Aug. 13, 2007. To read OSHA's "Safety and Health Topics" for electrical, visit http://www.osha.gov/SLTC/electrical/ index.html. Navy Electrical Update Navy photo by MC3 Marvin E. Thompson, Jr. The Navy is ahead of OSHA in updating electrical-safety standards. The Navy updated the Tri-Services Unified Facilities Criteria (UFC) 3-560-01, with Change 1, "Electrical Safety, Operations and Maintenance (O&M)," to meet the requirements of NFPA 70E 2004. This UFC supersedes UFC-3-560-10N (previously MIL-HDBK-1025/10), Safety of Electrical Transmission and Distribution Systems, referenced in OpNavInst 5100.23G. It incorporates tri-service requirements into one unified document and provides electrical-safety requirements for all shore electrical-work activities (low and high voltage) and addresses implementing NFPA 70E 2004 arc-flash criteria for electrical safety. An updated version of OpNav P-45-117-6-98, Electrical Worker Field Safety Guide, incorporating the requirements of this UFC, is being developed and should be available in the near future. Remember, regulations always are the minimum requirements to ensure worker safety. OSHA's 29 CFR 1910, Subpart S, and the Tri-Service UFC provide guidance to help ensure your command's electrical workers have a safe workplace. You always can take more steps to further protect yourself and your fellow workers. More information can be found at these websites: * http://www.wbdg.org/ccb/DOD/UFC/ufc_3_560_ 01.pdf * http://safetycenter.navy.mil/osh/downloads/ufc_ 3_560_01.pdf [DoD - Unified Facilities Criteria - Electrical Safety and O&M]. By Steve Geiger, CSP Naval Safety Center SAFE-NAVOSH@navy.mil licensed electrical contractor

Industrial Surge Protection Saves Customers Money

There are various options available by which one can save money, however, the budget is the deciding factor in choosing the type of lighting one can avail. Moreover, it is necessary to consult a professional electrician who can cater and provide various options which are feasible and can help to save money in the long run. An average household spends about 5% of its energy budget to lighting. Switching to energy-efficient lighting is one of the easiest ways to cut the energy bills. New light bulbs: what’s the difference? Traditional incandescent bulbs use a lot of energy to produce light and over 90% of the energy is wasted as heat. Whereas, the energy-efficient light bulbs use about 20%-80% less energy than the traditional incandescent, saving a lot of money. What are the different lighting choices available? There are many energy-saving light bulbs available, such as compact fluorescent lamps (CFLs), light emitting diodes (LEDs), etc. Although they cost more than the traditional incandescent bulbs, however, save a lot of money because they use less energy. One can easily find these in almost every hardware and home improvement store and can be fixed by taking help of a professional electrician. CFL vs LED light bulbs: which is better? Compact fluorescent lamps (CFLs) are a version of the long tube fluorescent lights. They use less electricity than the traditional light bulbs. Moreover, an ENERGY STAR-rated  CFL uses about one-fourth of the energy and lasts longer than a traditional incandescent that puts out the same amount of light. It contains mercury, which is a toxic heavy metal, which is harmful to both health and the environment. The light-emitting diodes (LEDs) light up immediately, like an incandescent bulb and is a source of light that is reliable, instantaneous, and can be dimmed accordingly. They last up to five times longer than the CFLs, which can literally last a lifetime. Moreover, these are user-friendly as they do not contain mercury and are available in soft, warm, and bright white hues. LEDs work well both indoors and outdoors because of their durability in the cold environment and they are safer, studier and easy to install. Comparing cost While replacing the light bulbs, the budget is an important factor in deciding which lighting option to choose. It is necessary to buy good quality bulbs that last longer rather than buying a dozen or cheaper ones that keep burning out. Although, both CFLs and LEDs use considerably less electricity than the traditional bulbs. However, long-lasting and more efficient light bulbs pay off over time. CFLs are comparatively cheaper than the LEDs, therefore, one can choose according to the set budget.   Other Important factors It is recommended to get a professional home energy audit with the help of a professional electrician. This helps one to pinpoint areas where the home is losing energy and what all improvements are required to save money in the long run. The professional recommends making upgrades in a home energy audit, which can save up to 10%-30% of the annual utility bill. Moreover, it is necessary to properly maintain the heating and cooling equipment; turning off lights when not in use; reducing electricity use throughout the home; reducing the use of hot water; ensuring if the home is adequately insulated; and smart use of home design elements, such as landscaping and window coverings can save more money in the long run. Also, one can choose the lighting products which are energy star rated, as it exceeds the federal minimum standards for efficiency, to save money.  install generator

 


installing electrical outlet

Find a Professional Electrical Contractors in the Following Areas of Massachusetts